|
The jig borer is a type of machine tool invented at the end of World War I to make possible the quick-yet-very-precise location of hole centers. It was invented independently in Switzerland and the United States.〔Moltrecht, Karl Hans: ''Machine Shop Practice'', 2nd ed. New York: Industrial Press, 1981, Volume 1, p. 403.〕 It can be viewed as a specialized species of milling machine that provided tool and die makers with a higher degree of positioning precision (repeatability) and accuracy than those general machines had previously provided. Although capable of milling, a jig borer is more suited to highly accurate drilling, boring, and reaming, where the quill or headstock does not see the significant side loading as it would with mill work. The result is a machine designed more for location accuracy than heavy material removal. A typical jig borer has a work table of around 400 x 200 mm, which can be moved using large handwheels (with micrometer-style readouts and verniers) on particularly carefully made shafts with a strong degree of gearing; this allowed positions to be set on the two axes to an accuracy of 0.0001 inch (2.5 micrometres). It was generally used to enlarge to a precise size smaller holes drilled with less accurate machinery in approximately the correct place (IE with the small hole strictly within the area to be bored out for the large hole). ==History== Before the jig borer was developed, hole center location had been accomplished either with layout (either quickly-but-imprecisely or painstakingly-and-precisely) or with drill jigs (themselves made with painstaking-and-precise layout). The jig borer was invented to expedite the making of drill jigs, but it helped to eliminate the need for drill jigs entirely by making quick precision directly available for the parts that the jigs would have been created for. The revolutionary underlying principle was that advances in machine tool control that expedited the making of jigs were fundamentally a way to expedite the cutting process itself, for which the jig was just a means to an end. Thus the jig borer's development helped advance machine tool technology toward later NC and CNC development. The jig borer was a logical extension of manual machine tool technology that began to incorporate some then-novel concepts that would become routine with NC and CNC control, such as: * coordinate dimensioning (dimensioning of all locations on the part from a single reference point); * working routinely in "tenths" (ten-thousandths of an inch, 0.0001 inch) as a fast, everyday machine capability (whereas it formerly was the exclusive domain of special, time-consuming, craftsman-dependent manual skills); and * circumventing jigs altogether. Franklin D. Jones, in his textbook ''Machine Shop Training Course'' (5th ed),〔Jones, Franklin D. ''Machine Shop Training Course'', 5th ed. New York: Industrial Press, 1964, Volume 1, p. 358.〕 noted: :"In many cases, a jig borer is a 'jig eliminator.' In other words, such a machine may be used instead of a jig either when the quantity of work is not large enough to warrant making a jig or when there is insufficient time for jig making." The technological advances that led to the jig borer and NC were about to usher in the age of CNC and CAD/CAM, radically changing the way humans manufactured many of their goods. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「jig borer」の詳細全文を読む スポンサード リンク
|